C3 Corvette 1968-1982 Upper A-Arm Shaft Kit

Get your C3 Corvette looking and feeling fresh with a new C3 Corvette 1968-1982 Upper A-Arm Shaft Kit.

Off-set upper a-arm shaft kits are needed when the cross member between the left and right frame rails have sagged or become bent overtime. You will be aware of this condition, because the shims needed on the upper a-arm shafts will be very thick (often a 1/2" or thicker).

Correcting this problem can be addressed with off-set upper control arm shaft kits.

This kit comes with all hardware to complete the project.

Please note: To properly fix this issue, you must install the entire kit.