This 2006-2013 C6 Corvette Harness Mount Bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.
The C6 Corvette Harness Mount Bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking.
Our C6 Corvette Harness Bars are easy to install and remove, utilizing existing holes and mounting points.
- Material: Type 304 stainless steel.
- Finish: Powder-coated with a durable black wrinkle-finish
- Weight: 17.3 lbs.
- Models: 2005-2013 C6 Coupes and 2006-2013 Z06 Coupes
- Installation: Bar attaches to factory mounting points in "B" pillars.
Note: Because of mounting locations in the C6 Corvette, the b-pillar plastic sail panel covers will require two holes to be drilled through them. Brey-Krause provides plastic plugs to cover the holes if the bar is ever removed. Sail panel replacements can be ordered from your GM Dealer, Part 15277640 for driver side, and 15277641 for the passenger side if the plastic plugs are not the desired solution. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.
Note: Due to the weight/dimensions of this item, additional freight charges will be applied at checkout.