Now you can boost the power in your C6 Corvette to near ZR1 performance. These new C6 Corvette Base / Grand Sport 2005-2013 Stage 2 Edelbrock E-Force Supercharger Systems (designed for track racing
) are exclusively tailored to increase your performance to:
- 2008-2013 599 flywheel horsepower and 547 ft./lbs. of torque - Tuner.
The Stage 2 Kit increases horsepower and torque with every year, the addition of a tuner maximizes this performance increase in every way, making this system perfect for track racing.
STAGE 2 - TRACK SYSTEMS
These systems include the components from the Stage 1 system with the addition of a cold air intake (if required), smaller pulley, fuel injectors (if required), fuel pump (if required) and a custom tune, giving you great performance for the track. These systems are for competition racing only (except for our Corvette systems, which are emissions legal) and are available as a complete kit or as an upgrade.
Edelbrock has released Executive Order (E.O.) numbers approved by the California Air Resources Board (CARB) for E-Force superchargers on the following vehicles: Chevrolet Corvette 2005-2011 L99/LS2/LS3/LS7 models (E.O. #D-215-76).
Edelbrock E-Force Supercharger Kits deliver optimum horsepower and torque in a complete, street-legal kit that fits under the factory hood. The core of each system is the Eaton Gen VI 2300 TVS® Supercharger rotating assembly.
EatonÆs assembly features a four-lobe design with 160? of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. The supercharger assembly has been integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces.
EdelbrockÆs inverted supercharger assembly is uniquely oriented, allowing for an incredible amount of intake runner length for maximizing low end torque. An integrated bypass valve helps eliminate parasitic loss under light throttle for improved mileage potential. GM systems utilize the factory 90mm throttle body, matched with the most unique and efficient inlet configuration on the market.
This combination results in a shorter, less restrictive intake path for improved air flow, without the need for a jackshaft.
Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger.
Finally, the Edelbrock E-Force Supercharger system is not just a performance upgrade, it also has great looks. The supercharger assembly and matching aluminum coil covers are black powdered coated for durability with highlighted fins and Edelbrock logo for a unique appearance that will give any engine compartment a custom look.
- Bolt-on installation û no cutting or modification needed and fits under the stock hood and cowl
- Features Eaton® TVS Rotor assembly; the same high-quality rotors used by GM on the Corvette ZR1
- Self-contained oil system with 100,000-mile service interval (no drilling or plumbing required)
- Electronic PCM programming module, with application specific tuning (included with street legal kits)
- Integrated bypass valve for little to no decrease in fuel economy
- 50-state emissions street legal - E.O. numbers pending
- See specific listing for warranty details
NOTE: Due to the dimensions / weight of this item, freight charges will be applied at check out.
Included Parts - See 4th Image Above - ref. Part Number Below
2005-2007 LS2 Corvette W/O Tuner - 15940
2005-2007 LS2 Corvette W/ Tuner - 1594
2008-2013 LS3 Corvette W/O Tuner - 15910
2008-2013 LS3 Corvette W/ Tuner - 1591
2010-2013 LS3 Grand Sport With Dry Sump W/O Tuner - 15750
2010-2013 LS3 Grand Sport With Dry Sump W/ Tuner - 1575