FiTech Go EFI 4 - 600HP System - Power Adder Throttle Body
FiTech Go EFI 4 - 600HP System - Power Adder Throttle Body

FiTech Go EFI 4 - 600HP System - Power Adder Throttle Body

$1,204.99Promotion Price:
MSRP:$1,523.98
Total Savings:$318.99(21%)
Available
FREE SHIPPING
Part Number:18609

Fitment:

1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982

Fitment:

1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003

Fitment:

2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019
The Go EFI Power Adder 600HP Kit is for the enthusiast that demands more from his system or is planning a future upgrade. This system is capable of 25 lbs of Boost right out of the box and can be used in a blow thru turbo or blower application or on a single roots style supercharger. 

You can also run a single stage of Wet Nitrous and control your A/F as well as Ignition timing. Has all of the self tuning features you expect from the Go EFI systems with the extra PRO Features needed for higher output engines.

Annular Swirl Discharge fuel distribution as well as Nitrous and Boost timing retard features make this a perfect choice for your Power Adder engine or your normally aspirated engine if you are considering future upgrades. 

Includes:
  • Die Cast Throttle Body
  • Handheld Controller
  • Windshield Mount
  • Hi-Flow 600 HP injectors (x4)
  • Built-in pressure regulator
  • 2.5 BAR Internal MAP Sensor
  • Throttle Position Sensor
  • Idle Air Control
  • Coolant Temp Sensor
  • Wide band O2 Sensor
  • O2 Bung Kit
  • -06AN Fuel Inlet Fitting
  • Gasket Kit
Features:
  • Boost Ready Throttle Body
  • Boost Ready ECU 2.5 Bar MAP sensor good for 21.7 PSI
  • Nitrous control with a host of safety features and accessories for Nitrous tuning
  • Nitrous and Boost specific target A/F target options
  • Boost and Nitrous timing retard strategies
  • 2 fan control (can set at separate temperatures)
  • Air-conditioning idle speed input kick up
  • Advanced hand Held Tuning Mode enabled
  • Pro Laptop Software, complete tuning for professional tuners
  • Initial setup is quick and easy
  • Simple touch screen selections get you up and running in minutes
  • Self-tuning- After startup the ECU immediately takes over and provides your vehicle with an optimum tune
  • Basic install can be done with just 4 wires and 2 sensors to install
  • The ECU is mounted on the throttle body - no external boxes or harnesses to clutter up your engine compartment or under dash
  • Uses a Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts
  • Throttle bodies have a completely universal base to fit any 4-BBL manifold
  • Throttle Linkage suits most transmissions
  • Choice of three fuel inlet connections
  • Voltage Control fuel pump control- Reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat to extend the life of your pump and keep the fuel in the tank cooler
  • Wet flow technology and a unique Swirl Spray Annular discharge design that assures complete atomization
  • Ignition timing can be controlled and adjusted on the fly from your touch screen controller
  • Air Fuel ratios can be optimized on the fly as you drive
  • Will work with CDI box but not required to control timing
  • Built in Fuel pressure regulator, no extra regulator to mount on your firewall.
  • Use of ignition timing control is optional and not required
  • Ignition timing control does not learn, requires synchronizing distributor to engine with a timing light
  • Fits cars with 4-BBL manifold

Reward Points

1205 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items