Restore hazy and sun damaged head light lenses on your vehicle using the exclusive technology found in this Universal Headlamp Restoration Kit.
This easy-to-use kit provides clarity and durable, long lasting protection in less than 30 minutes. Your car's head lamp lens is an engineered system and needs to be properly restored for best performance.
Newer plastic headlight lenses have a factory-applied UV coating to combat degradation. Over time, harsh sunlight and road debris can penetrate this coating which results in hazing and yellowing. This unsightly hazing is a serious safety concern, because it reduces down-road illumination by 66% and increases oncoming driver glare by scattering light upward.
Improve your vehicle's down-road illumination by 3 times and reduce glare caused by the refraction of your car's head lamp light through clouded and scratched lenses using this kit.
Unlike other lens restoration products designed just to remove the haze and yellowing, this Universal Headlight Restoration Kit restores the lens to like-new clarity and protection using a UV Block Clear Coat. This easy-to-apply durable coating has engineered polymers as well as active and passive UV blockers to protect the plastic from future deterioration.
What's in the Box?
- 1 oz. of Surface Activator
- ? oz. of Clarifying Compound
- 1 oz. of UV Blocking Clear Coat
- 3 Grades of Waterproof Premium Sandpaper (400, 1000 and 2000 grit)
- 2 White Applicator Cloths
- 1 Blue Lint-Free UV Clear Coat Applicator Cloth
- 1 Roll of Protective Tape
- 1 Vinyl Glove
Everything you need to restore two plastic headlight lenses on your vehicle is included in this kit. All you need to provide is water and maybe a few extra paper towels. The tool-free design allows virtually anyone to regain crystal clear, like-new headlights in as little as 30 minutes via the three simple steps listed below.
Three Simple, Tool-Free Steps to New-Looking Headlights
Step 1: Preparation
Wash lenses, mask painted surface (tape included in kit). Next, spray on the Surface Activator. Immediately, youÆll see the yellow gunk start to break down.
Step 2: Sand/Polish
Remove corrosion with a wet-sanding process using the provided 3 grades of premium waterproof sanding papers (400, 1000, 2000 grit). YouÆll notice the lens to take on a cloudy, smooth finish. Apply the oil-free Clarifying Compound. Already, this step will help you feel confident in the kitÆs ability. YouÆll be amazed at how clear the lenses will be.
Step 3: Clarify/Seal
YouÆll then apply the UV Block Clear Coat. ItÆs simple. Just apply as instructed in smooth, even applications. This UV Block Clear coat is a specially formulated polymer coating with active and passive UV blockers. This is the component that gives you long-lasting results.